200B Series Sealed SMT Sub-Miniature Toggle Switches

The 200B Series Toggle Switch is an IP-67 rated, sub-miniature SMT switch that provides a variety of switching functions. Choose between silver or gold contact materials. Its applications include telecommunications, instrumentation, networking, medical equipment and more.

Certifications

  

SPECIFICATIONS:

CONTACT RATING: Dependent on Contact Material
MECHANICAL LIFE: 30,000 Make-and-Break Cycles
CONTACT RESISTANCE: 20mΩ Max. Initial for Both Silver and Gold Plated Contacts
INSULATION RESISTANCE: 1,000MΩ Min.
DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
OPERATING TEMPERATURE: -30°C to 85°C

MATERIALS
CONTACTS/TERMINALS: Gold Plate Over Nickel Plated Copper Alloy
TERMINAL SEAL: Epoxy

Posted via email from Selection. Service. Speed. Switches from E-Switch.

SRM Series Rotary Dip Switches

The SRM series rotary dip switches feature through hole and SMT termination options. They come with 3x2, 3x3 or 4x1 pin layouts and are washable.

Applications for the SRM series rotary dip switches include test equipment, instrumentation, controller applications and others.

Certifications

SPECIFICATIONS
RATING: 100mA 5VDC (Switching); 
               100mA 50VDC (Non-Switching)

TEMPERATURE: -10°C to 60°C (Operating)
                          -40°C to 85°C (Storage)
ELECTRICAL LIFE: 15,000 Cycles
DIELECTRIC STRENGTH: 250VAC for 1 Minute
INSULATION RESISTANCE: 100MΩ Min. at 250VDC
CONTACT RESISTANCE: 100mΩ Max.
OPERATION FORCE: 400gf•cm

MATERIALS
BASE: Polyphenylene Sulfide (PPS)
HOUSING: Polyphenylene Sulfide (PPS)
ACTUATOR: Polyacetal
CONTACTS: Gold Over Nickel Plated
                    Glass Fabric Epoxy Resin
TERMINALS: Gold Over Nickel Plated Bronze
                      Tin Over Nickel Plated Bronze

Posted via email from Selection. Service. Speed. Switches from E-Switch.

Do you want a 3D Drawing from E-Switch?

If You Know The Part Number

If you are looking for a 3D drawing of one of our switches, and you know the part number, you can fill out the 3D drawing request below, and we will email the 3D model to you right away as a .STP file.

 

3D Drawing Request Form

 

If You DON'T Know The Part Number

1. Start by visiting our product catalog to find the type of switch you need. (i.e. pushbutton, rocker, tact).

2. Next, click on the product series to get to the product detail page. (i.e. TL3700 or PV6 series). 

3. On the product detail page, click on the "configurator" tab just to the right of the "detail specs" tab.

4. Configure your part number - it will appear above the configurator on the left.

5. Once the part number is complete, click "Request 3D Models" to the right.

6. The form will self populate your newly configured part number. Just fill in your information, and click "submit".

Posted via email from Selection. Service. Speed. Switches from E-Switch.

TL3210 Series Miniature Illuminated Tact Switch

 

The new TL3210 series ultra-miniature illuminated tact switch is available now from E-Switch. It's miniature size allows for designing in to the smallest spaces in your application. The LED colors available include blue, green, red, yellow, white and a red-green bi-color LED.

This ultra-miniature illuminated tact switch is the smallest illuminated switch we offer. It is a mere 5.6mm x 3.4mm in dimension.

The applications for this illuminated tact switch include, but are not limited to, audio/visual applications, computer peripherals, consumer electronics, instrumentation, telecommunications, medical equipment, among others.

Certifications:

SPECIFICATIONS:

Electrical Rating: 50mA @ 12VDC
Life Expectancy: 100,000 Cycles
Contact Resistance: 500mΩ Max.
Insulation Resistance: 100MΩ Min. at 100VDC
Dielectric Strength: 250VAC for 1 min.
Operating Temperature: -20°C to 70°C
Storage Temperature: -30°C to 80°C
Operating Force: 160 gf ± 50 gf
Travel: 0.2mm ± 0.1mm
Contact Arrangement: SPST, Normally Open

Posted via email from Selection. Service. Speed. Switches from E-Switch.

Panel Mount Switches

Our panel mount briefcase offers a large variety of switches! Included in this briefcase are rocker switches, pubhsuttons, anti-vandal switches, toggle and keylock switches, rotary switches and push-pull door interlock switches. We are always adding more panel mount switches to our product line so check here for the most complete and up to date listing. 

CLICK HERE TO DOWNLOAD A HI-RES PDF OF THE PANEL MOUNT BRIEFCASE 

Posted via email from Selection. Service. Speed. Switches from E-Switch.

PRODUCT ANNOUNCEMENT: E-Switch Introduces New Illuminated Tact Switch

E-Switch’s TL3210 series illuminated tact switch (300 dpi version is attached)		THE TL3210 SERIES TACT SWITCH OFFERS ULTRA-MINIATURE LED ILLUMINATION AND A SURFACE MOUNT DESIGN MINNEAPOLIS, MN --- E-Switch announces the brand new TL3210 series illuminated tact switch.  This tact switch is a surface mount (SMT) switch that offers LED illumination in blue, red, green and yellow, white and a bi-color red/green option. The ultra-miniature size of 5.6mm x 3.5mm is the tiniest illuminated tact switch we offer. This tact switch comes in tape & reel packaging at 2,500 pieces per reel. Applications and markets that could readily use this illuminated tact switch include the audio/visual market, computer peripherals, consumer electronics, instrumentation, telecommunications, and medical equipment, among others. Specifications include: Life Expectancy:  100,000 cycles Contact Rating: 50mA @ 12V DC Contact Resistance: 500mΩ Max Insulation Resistance: 100 MΩ min at 100V DC Dielectric Strength: 250V AC for 1 min. Operating Temperature: -20°C to 70°C Operating Force:  160gf ± 50gf Travel: 0.2mm ± 0.1mm Contact Arrangement: SPST, normally open Detailed specifications of the TL3210 series illuminated tact switch TL3210 series catalog datasheet Visit E-Switch at www.e-switch.com to request your full-line catalog! You can also request a sample of one of over 4,000 discrete part numbers for one of your projects!

About E-Switch. In 2009, E-Switch, Inc. acquired Lamb Industries and now offers one of the broadest switch lines available today. Both companies have been delivering innovative and quality switches to the electronics, telecom, high tech, instrumentation, industrial, appliance and consumer markets since 1979. Located in Minneapolis, Minnesota, their global reach extends to Europe, Asia and Latin America. Products include Rocker, Toggle, Slide, Tact, Pushbutton, Dip, Rotary, Keylock, Snap Action, Power, illuminated switches, and more. E-Switch has local reps, distributors, engineers and account managers on hand to provide specifying assistance and quick response to requests, along with a top notch sampling and cross-referencing program. E-Switch’s online catalogs include complete specifications, drawings and schematics.

E-Switch, Inc.

7153 Northland Drive N

Minneapolis, MN 55428

www.e-switch.com

800-867-2717

See the full gallery on Posterous

Posted via email from Selection. Service. Speed. Switches from E-Switch.

300 Series Miniature Rocker and Paddle Switches

The 300 Series miniature rocker and paddle switches offer a variety of model styles and actuator options. Available in up to 4 poles they have multiple termination options, and a snap-in panel mount option is available. For use in instrumentation, test equipment, telecommunications, networking, test equipment and more.

Certifications

   

SPECIFICATIONS:

CONTACT RATING: Dependent Upon Contact Material
MECHANICAL LIFE: 40,000 Make-and-Break Cycles
CONTACT RESISTANCE: 10mΩ Max. Initial
INSULATION RESISTANCE: 1,000MΩ Min.
DIELECTRIC STRENGTH: 1,000V RMS for 1 Minute
OPERATING TEMPERATURE: -30°C to 85°C

MATERIALS
TERMINAL/SWITCH SUPPORT: Brass or Steel Electrotin Plated
CONTACTS/TERMINALS: Silver or Gold Plated Copper Alloy

Posted via email from Selection. Service. Speed. Switches from E-Switch.