KAS Series Slide Dip Switches

The KAS slide DIP switches are available with PC pin or right angle PC pin termination. Available in up to 12 positions they come with tape seal options and are great for controller applications, along with telecommunications and test and instrumentation.

PLEASE NOTE: The right angle PC Pin termination option is not available with the recessed actuator. It is only available with the extended actuator.

Certifications

SPECIFICATIONS
CONTACT RATING: Switch: 25mA 24VDC
                               Carry: 100mA 50VDC
OPERATING LIFE: 2,000 Make-and-Break Cycles, Each Circuit
CONTACT RESISTANCE:
                  Initial: 50mΩ Typical at 2-4VDC at 100mA
                  After Life: 100mΩ Typical at 2-4VDC at 100mA
INSULATION RESISTANCE: 100MΩ Min. at 500VDC
OPERATING FORCE: 1000gf Max.
DIELECTRIC STRENGTH: 500V RMS Min. at Sea Level Between Adjacent Terminals
TRAVEL, ACTUATOR: 2.00mm Typical
TEMPERATURE RANGE: Operating/Storage: -40°C to 85°C
VIBRATION: To MIL-STD-202F, Method 201 A
SHOCK: To MIL-STD-202F, Method 213B, Condition A
CAPACITANCE: 5pf Max. Between Adjacent Terminals

SWITCH FUNCTION: SPST, 1 Thru 12 Positions (Except Position 11)

SOLDERING RECOMMENDATION 
               Wave: 500°F (260°C) for 5s Max.
               Hand: 30W Soldering Iron at 608°F (320°C) for 2s Typical 
               Keep all switches in the "OFF" position during soldering and cleaning
               process.

MATERIALS
HOUSING AND ACTUATOR: Glass Filled Polyester (PBT) UL94-V0
CONTACTS: Phosphor Bronze With Gold Plate Over Nickel Plate
TERMINALS: Phosphor Bronze With Gold Plate Over Nickel Plate
TAPE: Mylar

PACKAGING
Switches are supplied in standard IC tubes with all poles "OFF".

Posted via email from e-switch's posterous