Snap Action Switches

SS Series Sub-miniature Snap Action Switches

These NEW sub-miniature snap action switches are designed for higher reliability applications. With their small package size they work great in the following markets: Appliance, Timing Controls, Vending Machines, Gaming and Industrial Controls.

Certifications

   
  

SPECIFICATIONS
CONTACT RATING: Gold; 0.4VA Max. at 20VDC or VAC Max.
                                0.1Amps at 5VDC
                                1.5Amps at 250-UL
                                3Amps at 125-UL
LIFE EXPECTANCY: 100,000 Cycles Typical
MECHANICAL LIFE: 1,000,000 Cycles Typical
INSULATION RESISTANCE: 100MΩ Min. at 500VDC
DIELECTRIC STRENGTH: 500VDC
OPERATING TEMPERATURE: -25°C to 75°C
OPERATING FORCE: See Chart in Data Sheet

MATERIALS
SWITCH HOUSING: High Temperature PBT (UL94 V-0)
ACTUATOR BUTTON: High Temperature PBT (UL94 V-0)
TERMINALS: Copper Alloy, Plated
CONTACTS: Silver Alloy (Standard) or Gold
SPRING: Spring Steel

Posted via email from e-switch's posterous

200A Series Sealed Sub-Miniature Toggle Switches

The 200A Series sub-miniature toggle switches are sealed  to IP-67 standards.

Applications for this toggle switch include telecommunications, instrumentation, networking, and medical equipment devices.

Certifications

        

SPECIFICATIONS
CONTACT RATING: Dependent on Contact Material
MECHANICAL LIFE: 30,000 Make-and-Break Cycles
ELECTRICAL LIFE: 6,000 at Full Load
CONTACT RESISTANCE: 10mΩ Max. Initial for Both Silver and Gold Plated Contacts
INSULATION RESISTANCE: 1,000MΩ Min.
DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
OPERATING TEMPERATURE: -30°C to 85°C

MATERIALS
CONTACTS: Silver or Gold Plated Copper Alloy
TERMINAL SEAL: Epoxy

Posted via email from e-switch's posterous

Normally Closed Tactile Switch

TL3310 Series Normally Closed Tactile Switch

The TL3310 series normally closed, surface mount (SMT) tactile switch offers the user big quality in a little package.

Applications include telecommunications, consumer electronics, audio/visual, medical equipment, testing/instrumentation, and computer peripherals.

Certifications

SPECIFICATIONS
CONTACT RATING: 50mA 50VDC
LIFE EXPECTANCY: 100,000 Cycles - (100gf)
                                50,000 Cycles - (200gf)
CONTACT RESISTANCE: 100mΩ Max., Typical at 2-4VDC
INSULATION RESISTANCE: 1000MΩ
DIELECTRIC STRENGTH: 250VAC
ACTUATION FORCE: 100gf ± 40gf, 200gf ± 50gf
OPERATING TEMP: -20°C to 70°C (100gf)
                               -30°C to 80°C (200gf)
TRAVEL: 0.3mm ± 0.15mm (100gf)                  
               0.5mm ± 0.2mm (200gf)

Posted via email from e-switch's posterous

3.5mm x 6mm SMT tact switch

TL3302 Series 3.5mm x 6mm SMT Tactile Switch

TL3302 series tact switches feature a 3.5mm x 6mm packaged design. The TL3302 is an SMT tactile switch with reliable dome contact technology and strong tactile feedback.

Applications for this switch include telecommunications, consumer electronics, audio/visual, medical devices, testing/instrumentation and computer/peripherals.

Certifications

SPECIFICATIONS
CONTACT RATING: 50mA 12VDC
LIFE EXPECTANCY: 20,000-50,000 Cycles, Depending on Model
CONTACT RESISTANCE: 100mΩ Max., Typical at 2-4VDC; 100mA
INSULATION RESISTANCE: 100MΩ Min.
DIELECTRIC STRENGTH: 250VAC
ACTUATION FORCE:  130gf ± 50gf, 180gf ± 50gf, 260gf ± 50gf
OPERATING TEMPERATURE: -20°C to 70°C
TRAVEL: 0.25 + .02/-0.1mm

Posted via email from e-switch's posterous

Introducing E-Switch's Tilt Switch Series: The TM1000

E-Switch Home  Contact Us Follow Us ! Product Catalog | E-Cross™ | Where To Buy | Technical Information | About E-Switch Welcome to E-Switch's Newsletter The TM1000 series tilt switch is the first of a new series offered by E-Switch. With a 1,000,000 life cycle expectancy, the switch is environmentally friendly and contains no mercury. This tilt switch is triggered when it is tilted 45 degrees of the horizontal. The TM1000 series switch is best used when orientation or position sensing requirements are needed in the application. The markets for the TM1000 tilt switch include portable equipment, gaming and computer applications, security devices and medical equipment. RP8200 Series Illuminated Pushbutton Switch The RP8200 series round, illuminated pushbutton switch is available with a threaded or panel mount design and is sealed to IP65 ratings. FEATURES ·  CONTACT RATING: 100mA, 24VDC ·  LIFE EXPECTANCY: 200,000 Cycles at Full Load ·  CONTACT RESISTANCE: 100mΩ Max. (Initial) ·  INSULATION RESISTANCE: 1,000MΩ Min. at 500VDC ·  DIELECTRIC STRENGTH: 1,000VAC for 1 Minute ·  OPERATING FORCE: 560gf RP8400 Series Illuminated Pushbutton Switch The RP8400 series illuminated pushbutton switch encased in a metal die cast housing. This pushbutton switch series is for those seeking industrial strength durability without sacrificing style. Multiple color options are available. FEATURES ·  CONTACT RATING: 125mA 125VAC; 100mA 50VDC ·  LIFE EXPECTANCY: 500,000 Cycles at Full Load ·  CONTACT RESISTANCE: 50mΩ Max. (Initial) ·  INSULATION RESISTANCE: 1,000MΩ Min. at 500VDC ·  DIELECTRIC STRENGTH: 1,500VAC RMS ·  OPERATING FORCE: 350gf ·  OPERATING TEMPERATURE: -30°C to 85°C ·  CONTACT BOUNCE: 10ms Max. ·  TRAVEL: 1.5mm TL3300 Series SMT Tact Switch The TL3300 series SMT tact switch offers a long life expectancy of 200,000 cycles, multiple actuator options and multiple force options. Force options range from 160 grams to 520 grams. The size of the TL3300 series tact switch is 12mm x 12mm. FEATURES ·  ELECTRICAL RATING: 50mA, 12VDC ·  LIFE EXPECTANCY: Up to 200,000 Cycles ·  CONTACT RESISTANCE: 100mΩ Max. ·  IINSULATION RESISTANCE: 100MΩ Min. 500VDC ·  DIELECTRIC STRENGTH: 250VAC for 1 Minute ·  OPERATING TEMPERATURE: -25°C to 70°C ·  TRAVEL: 0.35mm +/- 0.1mm ·  OPERATING FORCE: 160 gf +/- 50 gf (200,000 cycles) 260 gf +/- 50 gf (100,000 cycles) 320 gf +/- 80 gf (50,000 cycles) 530 gf +/- 130 gf (50,000 cycles) ·  FUNCTION: SPST, Off-(On) 7153 Northland Drive, Minneapolis, MN 55428 US Phone: 763-504-3525 or 800-867-2717 | Fax: 763-531-8235 | Email:info@E-Switch.com © 2010 E-Switch, Inc. All rights reserved E-Switch, Inc. is a wholly owned subsidiary of Stein Industries, Inc.

Posted via email from e-switch's posterous