Power Toggle Switches

ST3 Series Power Toggle Switches

ST3 series toggle switches offer a heavy duty rating with UL approvals. This toggle switch has a rubber boot for water and dust protection, and has either tab, screw and solder terminal options.

Certifications

  

SPECIFICATIONS
RATING:
      24A 125VAC [cULus]
      15A 277VAC [cULus]
      2HP 125-250VAC [cULus]

TEMPERATURE: -20°C to 85°C
ELECTRICAL LIFE: 6,000 Cycles
CONTACT RESISTANCE: 50mΩ Max.
INSULATION RESISTANCE: 800MΩ Min. at 500VDC
DIELECTRIC STRENGTH 1,500VAC for 1 Minute

MATERIALS
BODY: Phenolic, UL94 V-0
ACTUATOR: Nickel Plated Brass
BUSHING: Nickel Plated Brass
HOUSING: Stainless Steel
CONTACTS: Silver Alloy
TERMINALS: Silver Plated Brass

___________________________________________

Rebecca Haüptman Cashman | Marketing Manager

 www.e-switch.com | rhauptman@e-switch.com | P: 763.504.3536

Follow
E-Switch

Posted via email from Selection. Service. Speed. Switches from E-Switch.

PV5 Series Sealed, Long Life Anti-vandal Switches | tamper resistant switch

PV5 series anti-vandal switch features a long life expectancy and IP65 rating.

Popular for use in elevators and kiosk applications, ticket dispensers and industrial-type applications.

Certifications

SPECIFICATIONS
RATING: 2A 48VDC
TEMPERATURE: -20°C to 70°C
ELECTRICAL LIFE: 200,000 Cycles
MECHANICAL LIFE: 1,000,000 Cycles
CONTACT RESISTANCE: 50mΩ Max. at 1A 12VDC
INSULATION RESISTANCE 1,000MΩ Min. 500VDC
DIELECTRIC STRENGTH: 2,000VAC for 1 Minute
INGRESS PROTECTION: IP65
PANEL CUTOUT: 12mm Diameter

MATERIALS
BUSHING: Stainless Steel
                 Nickel Plated Brass
                 Aluminum
ACTUATOR: Stainless Steel
                     Nickel Plated Brass
                     Polybutylene Terephthalate
BASE: Polybutylene Terephthalate
SEALING: Silicone Rubber
INNER ASSEMBLY: Polyamide 6/6
                                Brass
SPRING: Stainless Steel
CONTACT: Silver Alloy
TERMINALS: Silver Plated Brass
                     Steel
HARDWARE: Nickel Plated Brass

Posted via email from Selection. Service. Speed. Switches from E-Switch.

200 Series Sub-Miniature Toggle Switches

The 200 Series sub-miniature toggle switches are offered in both SPDT and DPDT functions. These toggle switches come with a variety of switching functions and bushing options. Eight different termination options are available. You can get these switches with vertical or right angle mounting.

Applications include telecommunications, instrumentation, networking, and medical equipment devices, among others.

Certifications

   

SPECIFICATIONS
CONTACT RATING: Dependent on Contact Material
MECHANICAL LIFE: 30,000 Make-and-Break Cycles
ELECTRICAL LIFE: 6,000 at Full Power
CONTACT RESISTANCE: 10mΩ Max. Initial for Both Silver and Gold Plated Contacts
INSULATION RESISTANCE: 1,000MΩ Min.
DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
OPERATING TEMPERATURE: -30°C to 85°C

MATERIALS
CONTACTS: Silver or Gold Plated Copper Alloy

Posted via email from Selection. Service. Speed. Switches from E-Switch.

E-Switch Quality Policy

At E-Switch we are committed to providing electromechanical switches to the worldwide marketplace.

All employees are responsible to continuously improve the business system in order to provide an innovative working environment that is responsive to our customers' needs and meets their requirements. This enables E-Switch to provide our customers with superior service and exceptional products at a competitive price.

E-Switch is completely committed to quality throughout our entire manufacturing, sales, and distribution network. We retain only professional independent sales representatives who are highly trained in our lines. Our global stocking distributors provide off-the-shelf product to ensure rapid delivery and easy accessibility to sample and product information.

 

Posted via email from Selection. Service. Speed. Switches from E-Switch.

How do I know if a switch is RoHS certified? Where can I go to get the certificate?

How do I know if a part number is RoHS certified?

It is a safe assumption to note that all our switches comply with RoHS standards. You can find our complete library of RoHS certifications by part number, here.

If you need anything specific, please email E-Switch and we will get right back with you. We have quite a selection of switches, including rockers, toggles, tact, pushbutton, snap action, detector, slide, keylock, rotary, DIPs, rotary DIPS, and more. Many of our switches offer IP ratings, and process sealing (for PCB).

Posted via email from e-switch's posterous

Recommended Soldering Guidelines for E-Switch

Please click on the PDF to view the Soldering Profile Guidelines in a printable version.

E-Switch has solder profile recommendations for hand soldering, SMT reflow and wave soldering processes for electronic switches.

Recommended Switch Soldering Guidelines

 

Most contamination problems can be prevented by exercising care during the cleaning and soldering process. Care should be taken not to immerse or spray unsealed switches during flux removal. Contact E-Switch for specific soldering recommendations and specifications not found in this catalog. Generalized soldering procedures are outlined below.

HAND SOLDERING AND TEMPERATURES

Recommend soldering irons of 30 watt maximum with a tip temperature of 345°C (650°F) for 2-3 seconds and solder of 0.030 - 0.040 diameter.

SMT REFLOW (LEAD AND LEAD-FREE)

Classification Reflow Profile

 

WAVE SOLDER TIME AND TEMPERATURES

When wave soldering, we recommend using a no-clean flux soldering process, rather than a process that requires washing. The fluxing process must be controlled so as not to have flux migrate inside the switch.

WAVE SOLDER

(Includes Pb-Free, max component side preheat temp-130°C)

Good venting is required. No-clean flux vapors can enter the switch if adequate venting is not available. The vapors will condense on the internal contacts and become an insulator when they solidify.

·         Preheat temperature/time: Circumferential temperature of the p.c. board not to exceed 100°C (212°F) for 60 seconds.

·         Soldering temperature/time: not to exceed 260°C (500°F) for 5 seconds.

Posted via email from e-switch's posterous

How do I know if a switch is washable or sealed? What are the different seal ratings?

On the product detail page of every series you will find information about the switch. If it is washable or sealed to a certain IP rating, it will list it on the product detail page. To get to the product detail page, go to our product catalog and search by type or by feature. We have a section of sealed switches here.

What are the different seal ratings and what do they mean?

Water-Wash, Process-Sealed, IP67 Switch Seal Rating

Definition of IP Codes (Ingress Protection):

IEC (International Electrotechnical Commission) 60529 Standards document specifies an international Classification system for the sealing effectiveness of enclosures of electrical equipment against the "Intrusion into the equipment of foreign bodies and mositure".

1.  Degrees of Protection - First Digit

     6      Dust-tight

2.  Degrees of Protection - Second Digit

     7     Protection against effects of immersion from 15cm to 1m (6" to 40").

Based on the above, our standard for defining a "process-sealed" switch is "sealed to meet the minimum requirements of IP-67".  This means that a switch rated to IP-67 is "Dust-tight" and will pass a water submersion test at 40" (1m), for up to 30 minutes.

Due to the variables encountered in actual water-wash machine processing, IP67 does not necessarily insure that water entry into the switch cannot occur.  the water-wash pressures and air-knife drying that occurs in modern pcb machine-washing can exceed the seal requirements of the IP-67 rating.  

 

Posted via email from e-switch's posterous

E-Switch wants to wish everyone a happy and healthy holiday season!

Please note our anti-vandal switch “buttons” on the snowman!

Posted via email from e-switch's posterous

How to request 3D Drawings from E-Switch

If you are interested in our switches, and want to request a 3D drawing, here are the instructions:

If You Know The Part Number

If you are looking for a 3D drawing of one of our switches, and you know the part number, you can fill out the 3D drawing request below, and we will email the 3D model to you right away as a .STP file.

 

3D Drawing Request Form

 

If You DON'T Know The Part Number

1. Start by visiting our product catalog to find the type of switch you need. (i.e. pushbutton, rocker, tact).

2. Next, click on the product series to get to the product detail page. (i.e. TL3700 or PV6 series). 

3. On the product detail page, click on the "configurator" tab just to the right of the "detail specs" tab.

4. Configure your part number - it will appear above the configurator on the left.

5. Once the part number is complete, click "Request 3D Models" to the right.

6. The form will self populate your newly configured part number. Just fill in your information, and click "submit".

     

Posted via email from e-switch's posterous

THE RDM SERIES ROTARY DIP SWITCH OFFERS

E-Switch announces the 500R series slide switch. This small switch offers IP67 sealing protection and comes in up to 3 positions. You can choose between on-off-on, and on-none-on options. You also have a choice between SPDT and DPDT switch functions. This slide switch offers you either right angle or thru-hole termination options as well. It comes standard with gold contacts and an epoxy seal.

Specifications include:

• Life Expectancy: 40,000 cycles
• Contact Rating: 0.4VA max @ 20V (AC or DC)
• Contact Resistance (Initial Max): 50mΩ
• Insulation Resistance: 500 MΩ min at 250VDC
• Dielectric Strength: 250 VAC RMS at Sea Level
• Operating Temperature: -20°C to 80°C
• Operating Force:

2-position: 200gf ± 100gf

3-position: 250gf ± 125gf

• Travel:

2-position: 1.9mm

3-position: 0.95mm

The 500R series slide switch can be used in many applications where prevention of exposure to moisture and dust is important. Some applications include audio/visual, computer peripherals, consumer electronics, instrumentation, telecommunication, and medical equipment, among others.

Detailed specifications of the 500R series slide switch

Catalog Datasheet

Visit E-Switch at www.e-switch.com to request your full-line catalog! You can also request a sample of one of over 4,000 discrete part numbers for one of your projects!

About E-Switch. In 2009, E-Switch, Inc. acquired Lamb Industries and now offers one of the broadest switch lines available today. Both companies have been delivering innovative and quality switches to the electronics, telecom, high tech, instrumentation, industrial, appliance and consumer markets since 1979. Located in Minneapolis, Minnesota, E-Switch’s global reach extends to Europe, Asia and Latin America. Products include Rocker, Toggle, Slide, Tact, Pushbutton, Dip, Rotary, Keylock, Snap Action, Power, illuminated switches, and more. E-Switch has local reps, distributors, engineers and account managers on hand to provide specifying assistance and quick response to requests, along with a top notch sampling and cross-referencing program. E-Switch’s online catalogs include complete specifications, drawings and schematics.

Posted via email from e-switch's posterous

PV4 Series Illuminated, Sealed, Long Life Anti-vandal Switches

PV4 series anti-vandal switches are water resistant to IP65 ratings. Featuring a colored bezel and multiple actuator options, the PV4 series anti-vandal switches have a long life expectancy.

The switches in this series of anti-vandal switches are popular for use in elevators and kiosk applications, ticket dispensers and industrial-type applications. You can also find them in areas requiring aesthetic appeal.

Certifications

SPECIFICATIONS
RATING: 2A 48VDC
ILLUMINATION BASE RATING:
            Red, Yellow and Orange: 20mA 1.8V
            Blue, Green and White: 20mA 2.8V
TEMPERATURE: -20°C to 70°C
MECHANICAL LIFE: 1,000,000 Cycles
ELECTRICAL LIFE: 50,000 Cycles
CONTACT RESISTANCE: 50mΩ Max. at 1A 12VDC
INSULATION RESISTANCE: 1,000MΩ Min. 500VDC
DIELECTRIC STRENGTH: 2,000VAC for 1 Minute
INGRESS PROTECTION: IP65
PANEL CUTOUT: 19mm Diameter

MATERIALS
BUSHING: Stainless Steel
                 Aluminum
ACTUATOR: Stainless Steel
                    Aluminum
BASE: Polybutylene Terephthalate
           Polycarbonate
           Polyamide 6/6
SEALING: Silicone
INNER ASSEMBLY: Polycarbonate
                               Polyoxymethylene
                               Brass
SPRING: Stainless Steel
CONTACT: Silver Alloy
TERMINALS: Brass
                     Silver Plated Brass
                     Steel
HARDWARE: Nickel Plated Brass

Posted via email from e-switch's posterous

Rotary DIP Switch

Our latest and newly released… Rotary DIP switches, the RDT and RDM series are now available. These may be just the “typical” rotary DIP switches you see everywhere, but they also are sealed to IP67 ratings, and have the right angle or vertical options. They also come in surface mount or through hole termination, so you can determine the best size and shape for your product! Contact E-Switch at 800-867-2717 for more information, or visit our website e-switch.com and request a sample.

Posted via email from e-switch's posterous

PRODUCT ANNOUNCEMENT: E-Switch Introduces New Rotary DIP Switch - RDM Series

E-Switch’s RDM Series Rotary DIP Switch (300 dpi version is attached)		THE RDM SERIES ROTARY DIP SWITCH OFFERS IP67 SEAL PROTECTION IN SMALL SIZE MINNEAPOLIS, MN --- E-Switch announces the RDM series rotary DIP switch. This small switch offers a choice of 10 or 16 positions. It offers IP67 sealing protection and has an ultra slim size for high density mounting. It comes with gold contacts. Specifications include: Life Expectancy: 25,000 steps Contact Rating: Switching: 42VDC, 100mA Non-switching: 42VDC, 400mA Contact Resistance (Initial Max): 80mΩ Insulation Resistance: 100 MΩ min at 250VDC Dielectric Strength: 250 VAC for 1 minute Operating Temperature: -60°C to 125°C Actuation Force: 120gf +/- 30gf Detailed specifications of the RDM series rotary DIP switch. Visit E-Switch at www.e-switch.com to request your full-line catalog! You can also request a sample of one of over 4,000 discrete part numbers for one of your projects!

About E-Switch. In 2009, E-Switch, Inc. acquired Lamb Industries and now offers one of the broadest switch lines available today. Both companies have been delivering innovative and quality switches to the electronics, telecom, high tech, instrumentation, industrial, appliance and consumer markets since 1979. Located in Minneapolis, Minnesota, and Portland, Oregon, their global reach extends to Europe, Asia and Latin America. Products include Rocker, Toggle, Slide, Tact, Pushbutton, Dip, Rotary, Keylock, Snap Action, Power, illuminated switches, and more. E-Switch has local reps, distributors, engineers and account managers on hand to provide specifying assistance and quick response to requests, along with a top notch sampling and cross-referencing program. E-Switch’s online catalogs include complete specifications, drawings and schematics.

E-Switch, Inc.

7153 Northland Drive N

Minneapolis, MN 55428

www.e-switch.com

800-867-2717

Posted via email from e-switch's posterous

500R Series Slide Switch Sealed to IP67

The 500R series sealed slide switch offers IP67 ratings for protection from water, dust and the elements. It comes in up to 3-positions and has both SPDT and DPDT options.

This slide switch can work well in a variety of applications and markets, where protection from moisture and dust is of a concern.

CERTIFICATIONS:

SPECIFICATIONS:

Electrical Rating: 0.4VA Max. @ 20V (AC or DC max)
Life Expectancy: 40,000 cycles
Contact Resistance: 50mΩ Max
Insulation Resistance: 500MΩ Min at 250VDC
Dielectric Strength: >500VAC RMS at Sea Level
Operating Temperature: -20ºC to 80ºC
Operating Force:
2-position: 200gf ± 100gf
3-position: 250gf ± 125gf
Travel:
2-position: 1.9mm
3-position: 0.95mm

Posted via email from e-switch's posterous

100A Series Sealed Miniature Toggle Switches

The 100A Series miniature toggle switches are sealed to IP-67 standards and are tiny in size. These toggle switches are easy to fit on your PC board and for environments that may be exposed to moisture, dust or other solvents.

Applications for this switch include telecommunications, instrumentation, networking and medical equipment devices, among others.

Certifications

    

SPECIFICATIONS
CONTACT RATING: Dependent on Contact Material
MECHANICAL LIFE: 30,000 Make-and-Break Cycles
ELECTRICAL LIFE: 6,000 at Max. Power
CONTACT RESISTANCE: 10mΩ Max. Initial for Both Silver and Gold Plated Contacts
INSULATION RESISTANCE: 1,000MΩ Min.
DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
OPERATING TEMPERATURE: -30°C to 85°C

MATERIALS
CONTACTS: Silver or Gold Plated

Posted via email from e-switch's posterous

PV6 Series Illuminated, Sealed, Long Life Anti-vandal Switches

PV6 anti vandal switches feature a long life expectancy and are water resistant. Illumination LED colors include red, yellow, orange, blue, green and white.

Applications include elevator and kiosks, among other designs that require vandal resistance.

Certifications

SPECIFICATIONS
RATING: 2A 48VDC
ILLUMINATION BASE RATING:
            Red, Yellow and Orange: 20mA 1.8V
            Blue, Green and White: 20mA 2.8V
TEMPERATURE: -20°C to 70°C
MECHANICAL LIFE: 1,000.000 Cycles
ELECTRICAL LIFE: 50,000 Cycles
CONTACT RESISTANCE: 50mΩ Max.
INSULATION RESISTANCE: 1,000MΩ Min.
DIELECTRIC STRENGTH: 2,000VAC
INGRESS PROTECTION: IP65
PANEL CUTOUT: 16mm Diameter

MATERIALS
BUSHING: Stainless Steel
                  Nickel
                  Aluminum
                  Polyoxymethlyne
ACTUATOR: Stainless Steel
                     Nickel 
                     Polycarbonate
                     Polyoxymethylene
                     Aluminum
BASE: Poliamide 6/6
SEALING: Silicone Rubber
INNER ASSEMBLY: Polycarbonate
                                Brass
SPRING: Stainless Steel
CONTACTS: Silver Alloy
TERMINALS: Brass
HARDWARE: Nickel Plated Brass

Posted via email from e-switch's posterous

PV5 Series Sealed, Long Life Anti-vandal Switches

PV5 anti-vandal switch features a long life expectancy and IP65 rating. This vandal resistant switch offers eight actuator colors to choose from: black, white, yellow, blue, green, red, nickel and stainless steel.

These switches are popular for use in elevators and kiosk applications, ticket dispensers and industrial-type applications, along with security appliances.

Certifications

SPECIFICATIONS
RATING: 2A 48VDC
TEMPERATURE: -20°C to 70°C
ELECTRICAL LIFE: 200,000 Cycles
MECHANICAL LIFE: 1,000,000 Cycles
CONTACT RESISTANCE: 50mΩ Max. at 1A 12VDC
INSULATION RESISTANCE 1,000MΩ Min. 500VDC
DIELECTRIC STRENGTH: 2,000VAC for 1 Minute
INGRESS PROTECTION: IP65
PANEL CUTOUT: 12mm Diameter

MATERIALS
BUSHING: Stainless Steel
                 Nickel Plated Brass
                 Aluminum
ACTUATOR: Stainless Steel
                     Nickel Plated Brass
                     Polybutylene Terephthalate
BASE: Polybutylene Terephthalate
SEALING: Silicone Rubber
INNER ASSEMBLY: Polyamide 6/6
                                Brass
SPRING: Stainless Steel
CONTACT: Silver Alloy
TERMINALS: Silver Plated Brass
                     Steel
HARDWARE: Nickel Plated Brass

Posted via email from e-switch's posterous

PV4 Series Illuminated, Sealed, Long Life Anti-vandal Switches

PV4 series anti-vandal switches are water resistant to IP65 ratings. Featuring a colored bezel and multiple actuator options, the PV4 series anti-vandal switches have a long life expectancy and are vandal resistant. They are a high quality switch with a very appealing aesthetic look and design. We have many other sizes and options in our PV series line up.

These tamper resistant switches are popular for use in elevators and kiosk applications, ticket dispensers and industrial-type applications. They are also great for security applications that include panels.

E-Switch products also include rocker switches, toggle switches, tact switches, DIP switches, pushbutton switches, and more. Please contact us for more information.

Certifications

SPECIFICATIONS
RATING: 2A 48VDC
ILLUMINATION BASE RATING:
            Red, Yellow and Orange: 20mA 1.8V
            Blue, Green and White: 20mA 2.8V
TEMPERATURE: -20°C to 70°C
MECHANICAL LIFE: 1,000,000 Cycles
ELECTRICAL LIFE: 50,000 Cycles
CONTACT RESISTANCE: 50mΩ Max. at 1A 12VDC
INSULATION RESISTANCE: 1,000MΩ Min. 500VDC
DIELECTRIC STRENGTH: 2,000VAC for 1 Minute
INGRESS PROTECTION: IP65
PANEL CUTOUT: 19mm Diameter

MATERIALS
BUSHING: Stainless Steel
                 Aluminum
ACTUATOR: Stainless Steel
                    Aluminum
BASE: Polybutylene Terephthalate
           Polycarbonate
           Polyamide 6/6
SEALING: Silicone
INNER ASSEMBLY: Polycarbonate
                               Polyoxymethylene
                               Brass
SPRING: Stainless Steel
CONTACT: Silver Alloy
TERMINALS: Brass
                     Silver Plated Brass
                     Steel
HARDWARE: Nickel Plated Brass

Posted via email from e-switch's posterous

PV3 Series Illuminated, Sealed, Long Life Anti-vandal Switches

The PV3 series illuminated anti-vandal switch is water resistant to IP40/IP65 ratings, and has many functions, including long life expectancy.

This anti-vandal switch is popular for use in elevators and kiosk applications, ticket dispensers, security equipment and industrial-type applications.

Certifications

     

SPECIFICATIONS:

RATING: 2A 48VDC
ILLUMINATION BASE RATING:
            Red, Yellow and Orange: 20mA 1.8V
            Blue, Green and White: 20mA 2.8V
TEMPERATURE: -20°C to 55°C
MECHANICAL LIFE: 200,000 Cycles
ELECTRICAL LIFE: 50,000 Cycles
CONTACT RESISTANCE: 50mΩ Max. at 1A 12VDC
INSULATION RESISTANCE: 1,000MΩ Min.
DIELECTRIC STRENGTH: 2,000VAC for 1 Minute
INGRESS PROTECTION: IP40/IP65
PANEL CUTOUT: 16mm Diameter

MATERIALS
BUSHING: Gold Plated Brass
                  Nickel Plated Brass
                  Stainless Steel
                  Aluminum
ACTUATOR: Gold Plated Brass
                     Nickel Plated Brass
                     Stainless Steel
                     Aluminum
                     Polycarbonate
BASE: Polybutylene Terephthalate
           Polycarbonate
SEALING: Silicone Rubber
                 Stainless Steel
INNER ASSEMBLY: Polyoxymethylene, 
                                Polycarbonate
                                Silver Plated Brass
                                Stainless Steel
SPRING: Stainless Steel
                Beryllium Copper
MOBILE CONTACT: Phosphor Bronze
CONTACT: Silver Alloy
TERMINALS: Silver Plated Brass
HARDWARE: Nickel Plated Brass

Posted via email from e-switch's posterous

PV3 Series Illuminated, Sealed, Long Life Anti-vandal Switches

The PV3 series illuminated anti-vandal switch is water resistant to IP40/IP65 ratings, and has many functions, including long life expectancy.

This anti-vandal switch is popular for use in elevators and kiosk applications, ticket dispensers, security equipment and industrial-type applications.

Certifications

     

SPECIFICATIONS:

RATING: 2A 48VDC
ILLUMINATION BASE RATING:
            Red, Yellow and Orange: 20mA 1.8V
            Blue, Green and White: 20mA 2.8V
TEMPERATURE: -20°C to 55°C
MECHANICAL LIFE: 200,000 Cycles
ELECTRICAL LIFE: 50,000 Cycles
CONTACT RESISTANCE: 50mΩ Max. at 1A 12VDC
INSULATION RESISTANCE: 1,000MΩ Min.
DIELECTRIC STRENGTH: 2,000VAC for 1 Minute
INGRESS PROTECTION: IP40/IP65
PANEL CUTOUT: 16mm Diameter

MATERIALS
BUSHING: Gold Plated Brass
                  Nickel Plated Brass
                  Stainless Steel
                  Aluminum
ACTUATOR: Gold Plated Brass
                     Nickel Plated Brass
                     Stainless Steel
                     Aluminum
                     Polycarbonate
BASE: Polybutylene Terephthalate
           Polycarbonate
SEALING: Silicone Rubber
                 Stainless Steel
INNER ASSEMBLY: Polyoxymethylene, 
                                Polycarbonate
                                Silver Plated Brass
                                Stainless Steel
SPRING: Stainless Steel
                Beryllium Copper
MOBILE CONTACT: Phosphor Bronze
CONTACT: Silver Alloy
TERMINALS: Silver Plated Brass
HARDWARE: Nickel Plated Brass

Posted via email from e-switch's posterous

PV2 Series Water Resistant, Long Life Anti-vandal Switches

PV2 anti-vandal switch is vandal resistant and water resistant. This anti-vandal switch has a long life expectancy and a very aesthetic appeal for higher end products.

This switch is popular for use in elevators and kiosk applications, ticket dispensers, security devices and industrial-type applications.

Certifications

SPECIFICATIONS:

RATING: 2A 48VDC
TEMPERATURE: -20°C to 70°C
MECHANICAL LIFE: 1,000,000 Cycles
ELECTRICAL LIFE: 200,000 Cycles
CONTACT RESISTANCE: 50mΩ Max. at 1A 12VDC
INSULATION RESISTANCE: 1,000MΩ Min.
DIELECTRIC STRENGTH: 2,000VAC for 1 Minute
INGRESS PROTECTION: IP65
PANEL CUTOUT: 16mm Diameter

MATERIALS
BUSHING: Gold Plated Brass
                  Nickel Plated Brass
                  Stainless Steel
ACTUATOR: Gold Plated Brass
                     Nickel Plated Brass
                     Stainless Steel
BASE: Polybutylene Terephthalate
SEALING: Silicone
INNER ASSEMBLY: Polyamide 6/6
                                Brass
                                Polyoxymethylene
SPRING: Stainless Steel
CONTACT: Silver Alloy
TERMINALS: Silver Plate Brass
                      Steel
HARDWARE: Nickel Plated Brass

Posted via email from e-switch's posterous

PV1 Series Long Life, Water Resistant Anti-vandal Switches

PV1 series water resistant, sealed, anti-vandal switches feature long life and custom laser engraved markings.

Popular for use in elevators and kiosk applications, ticket dispensers and industrial-type applications. These pushbutton switches also are used for security applications.

Certifications

SPECIFICATIONS:
RATING: 2A 48VDC
TEMPERATURE: -20°C to 70°C
MECHANICAL LIFE: 1,000,000 Cycles
ELECTRICAL LIFE: 200,000 Cycles
CONTACT RESISTANCE: 50mΩ Max. at 1A 12VDC
INSULATION RESISTANCE: 1,000MΩ Min.
DIELECTRIC STRENGTH: 2,000VAC for 1 Minute
INGRESS PROTECTION: IP65
PANEL CUTOUT: 19mm Diameter

MATERIALS
BUSHING: Gold Plated Brass
                  Nickel Plated Brass
                  Stainless Steel
ACTUATOR: Gold Plated Brass
                     Nickel Plated Brass
                     Stainless Steel
BASE: Polybutylene Terephthalate
SEALING:  Silicone Rubber
                   Stainless Steel
INNER ASSEMBLY:  Polyamide 6/6
                                 Brass
SPRING: Stainless Steel
CONTACT: Silver Alloy
TERMINALS: Silver Plated Brass
                      Steel
HARDWARE: Nickel Plated Brass

Posted via email from e-switch's posterous

KAS Series Slide Dip Switches

The KAS slide DIP switches are available with PC pin or right angle PC pin termination. Available in up to 12 positions they come with tape seal options and are great for controller applications, along with telecommunications and test and instrumentation.

PLEASE NOTE: The right angle PC Pin termination option is not available with the recessed actuator. It is only available with the extended actuator.

Certifications

SPECIFICATIONS
CONTACT RATING: Switch: 25mA 24VDC
                               Carry: 100mA 50VDC
OPERATING LIFE: 2,000 Make-and-Break Cycles, Each Circuit
CONTACT RESISTANCE:
                  Initial: 50mΩ Typical at 2-4VDC at 100mA
                  After Life: 100mΩ Typical at 2-4VDC at 100mA
INSULATION RESISTANCE: 100MΩ Min. at 500VDC
OPERATING FORCE: 1000gf Max.
DIELECTRIC STRENGTH: 500V RMS Min. at Sea Level Between Adjacent Terminals
TRAVEL, ACTUATOR: 2.00mm Typical
TEMPERATURE RANGE: Operating/Storage: -40°C to 85°C
VIBRATION: To MIL-STD-202F, Method 201 A
SHOCK: To MIL-STD-202F, Method 213B, Condition A
CAPACITANCE: 5pf Max. Between Adjacent Terminals

SWITCH FUNCTION: SPST, 1 Thru 12 Positions (Except Position 11)

SOLDERING RECOMMENDATION 
               Wave: 500°F (260°C) for 5s Max.
               Hand: 30W Soldering Iron at 608°F (320°C) for 2s Typical 
               Keep all switches in the "OFF" position during soldering and cleaning
               process.

MATERIALS
HOUSING AND ACTUATOR: Glass Filled Polyester (PBT) UL94-V0
CONTACTS: Phosphor Bronze With Gold Plate Over Nickel Plate
TERMINALS: Phosphor Bronze With Gold Plate Over Nickel Plate
TAPE: Mylar

PACKAGING
Switches are supplied in standard IC tubes with all poles "OFF".

Posted via email from e-switch's posterous