JS5208 Series 5-position Navigation Switch

The JS5208 series 5-position navigation / joystick switch replaces 5 independent switches.

The JS5208 series navigation switch is designed for SMT applications that require navigation, such as consumer electronics where a user interface is required.

Other applications for this navigation / joystick switch include handheld instrumentation, telecommunications, among others.

Other navigation switches

Certifications

 

SPECIFICATIONS

CONTACT RATING: 20mA 15VDC
LIFE EXPECTANCY: 100,000 Cycles
CONTACT RESISTANCE: 100mΩ Max. Initial
DIELECTRIC STRENGTH: 250VAC
OPERATING TEMPERATURE: -20°C to 70°C
OPERATING FORCE: Push: 500gf ± 150gf
                                 Tilt: 280gf ± 100gf
TRAVEL: Push: 1.0 ± .02mm
               Tilt: 8 Degrees ± 2 Degrees       

Posted via email from Selection. Service. Speed. Switches from E-Switch.

TS Series Sub-Miniature Snap Action Switches

The TS series subminiature snap action switch comes with a vertical, left angle or right angle PC pin termination. The applications for the TS switch include security and detection devices, appliances, instrumentation, power tools and more.

Other snap action switches

Certifications

SPECIFICATIONS
CONTACT RATING: 0.3A 6VDC
MECHANICAL LIFE: 50,000 Cycles Typical
INSULATION RESISTANCE: 100MΩ Min.
DIELECTRIC STRENGTH: 250VAC for 1 Minute
OPERATING TEMPERATURE: -25°C to 85°C
STORAGE TEMPERATURE: -30°C to 85°C

Posted via email from Selection. Service. Speed. Switches from E-Switch.

TL3253 Series Dual LED Tact Switch

The new TL3253 series dual LED tact switch offers a right angle mount and multiple LED color options. There are 2 actuator heights to choose from, and multiple cap options to choose from as well.  This tactile switch offers a long life at 500,000 life cycles.

The TL3253 series tact switch works well in audio/visual, computer peripherals, consumer electronics, instrumentation, telecommunications and medical equipment applications.

More tact switches
More illuminated switches
More long life switches

CERTIFICATIONS:

 

SPECIFICATIONS

Electrical Rating: 50mA @ 12V DC
Life Expectancy: 500,000 cycles
Contact Resistance: 100mΩ Max.
Insulation Resistance: 100MΩ Min at 100V DC
Dielectric Strength: 250V AC for 1 min.
Operating Temperature -20°C to 70°C
Storage Temperature: -30°C to 80°C
Operating Force: 160 gf ±50 gf
Travel: 0.25mm +0.2/-0.1mm
Contact Arrangement: SPST, Normally Open

Posted via email from Selection. Service. Speed. Switches from E-Switch.

D16 Series Illuminated Pushbutton Switches

These illuminated pushbutton switches are available with solder lug termination. The P16 series are available with a socket connection and the L16 have pilot indicators. They come in up to 4 poles, have latching and momentary functions, and round, square or rectangular pushbutton heads. Neon, incandescent and LED lamps available.

Applications include low power on/off designs, telecommunications, networking, computers/servers, performance audio, external hard drives and modems, and instrumentation.

More illuminated switches
More pushbutton switches
 

Certifications

          

SPECIFICATIONS
RATING: 5A 250VAC 
               8A 125VAC 
               6A 24VDC 
MECHANICAL LIFE: 100,000 Cycles
ELECTRICAL LIFE: 50,000 Cycles
CONTACT RESISTANCE: 100mΩ Max. Typical; Initial at 2-4VDC
INSULATION RESISTANCE: >1,000MΩ
DIELECTRIC STRENGTH: >1,500V for 1 Minute
                                       >3,000V Between Poles
OPERATING FORCE: 300g/pole
OPERATING TEMPERATURE: -20°C to 55°C
SAFETY STANDARD AND APPROVALS:
                                       D16: UL, CSA, VDE, Semko, Nemko, Demko, Fimko

MATERIALS
SWITCH HOUSING: Polyetherimide (PEI)
CONTACT HOUSING: Diallyl Phthalate (DAP)
LENS: Polycarbonate (PC)
CONTACTS: Silver Plated Copper Alloy
TERMINALS: Silver Plated Copper Alloy

See the full gallery on Posterous

Posted via email from Selection. Service. Speed. Switches from E-Switch.

Long Life Switches from E-Switch

E-Switch offers long life switches with up to 5 million operating cycles.

	LL1105 Series Long Life Tact Switches - Rated 5 Million Operations • 6mm x 6mm tactile switch • 65 gram actuation force • Vertical and right angle surface mount designs • Silver or gold plated contacts
	LP16 Series Long Life, Illuminated Pushbutton Switch • 50,000,000 cycle life expectancy • Long, 3.3mm travel • Multiple illumination options • 2 cap sizes
	LS Series Standard Snap Action Switches • 15A 125VAC rating • Up to 1 million mechanical life cycles • Available with gold contacts • Multiple actuator and termination options
	MS Series Miniature Snap Action Switches • 5A 125VAC rating • Up to 1 million mechanical life cycles • Available with gold contacts • Multiple actuator and termination options
	PV1 Series Long Life, Water Resistant Anti-vandal Switches • 19mm diameter panel cutout • 1 pole Off-(On) with IP65 rating • Solder and screw terminal options available
	PV2 Series Water Resistant, Long Life Anti-vandal Switches • 16mm diameter panel cutout • 1 pole Off-(On) with IP65 rating • Solder and screw terminal options available
	PV3 Series Illuminated, Sealed, Long Life Anti-vandal Switches • 16mm diameter panel cutout • Dot and ring illumination options available • 1 or 2 poles momentary functions • Up to IP65 rating
	PV4 Series Illuminated, Sealed, Long Life Anti-vandal Switches • 19mm diameter panel cutout • Dot and ring illumination options available  • 1 or 2 poles maintained, momentary and double break functions with IP65 rating
	PV5 Series Sealed, Long Life Anti-vandal Switches • 12mm diameter panel cutout • Solder terminal options available  • 1 pole momentary switch • IP65 rated
	PV6 Series Illuminated, Sealed, Long Life Anti-vandal Switches • 16mm diameter panel cutout • 1 pole Off-(On) with IP65 rating • Dot and ring illumination options available • Solder terminal options available
	PV7 Series Sealed, Long Life, Illuminated Anti-vandal Switches • 22mm diameter panel cutout • Dot and ring illumination options available  • 2 poles maintained and momentary functions • IP65 rated
	PV8 Series Illuminated, Sealed Anti-vandal Switches • 25mm diameter panel cutout • Dot and ring illumination options available  • 1 or 2 poles maintained and momentary functions • IP65 rated
	SS Series Sub-Miniature Snap Action Switches • 3A 125VAC rating • Up to 1 million mechanical life cycles • Available with gold contacts • Multiple actuator and termination options
	TL1140 Series Long Life Thru-Hole Tactile Switch • 6.2mm x 6.2mm tactile switch • 70 ± 20 gram force • Surface mount design • Silver plated contacts
	TL1150 Series Tactile Switches • 6.2mm x 6.2mm tactile switch • 70 ± 20 gram force • PC board mount design • Silver plated contacts
	TL1265 Series Illuminated Vertical Tact Switch • 6.8mm x 7mm tactile switch • 160 ± 50 gram force option • LED illumination options • Vertical through hole mount design
	TL3253 Series Dual LED Tact Switch • 7.5mm x 22.6mm tactile switch • 160 gram force • Dual LEDs • Right angle mount
	TL4100 Series Right Angle Tact Switch • 1,000,000 cycle life expectancy • 120 and 240 gram force options • Unique pcb edge-mounting design
	TL6700 Series Sealed SMT Tactile Switch • 6.9mm x 6.2mm tactile switch • 160 ± 50; 260 ± 50 gram force options • Surface mount design • Process sealed
	TM1000 Series Tilt Switch • Up to 20mA 24V AC or DC rating •1,000,000 cycle life expectancy • Switch is triggered when tilted 45 degrees • Environmentally friendly, contains no mercury
	TS2 Series Surface Mount Snap Action Switch • 100mA 125VAC or 48VDC rating • 3,000,000 cycle life • Subminiature size • Surface mount design

Posted via email from Selection. Service. Speed. Switches from E-Switch.

SRT Series Rotary Dip Switches

The SRT series rotary DIP switches feature through hole termination option. They come with 4x1 pin layout and are washable.

Applications for the SRT series rotary dip switches include test equipment, instrumentation, controller applications and others.

Certifications

SPECIFICATIONS

RATING: 100mA 5VDC (Switching); 
               100mA 50VDC (Non-Switching)

TEMPERATURE: -10°C to 60°C (Operating)
                          -40°C to 85°C (Storage)
ELECTRICAL LIFE: 15,000 Cycles
DIELECTRIC STRENGTH: 250VAC for 1 Minute
INSULATION RESISTANCE: 100MΩ Min. at 250VDC
CONTACT RESISTANCE: 100mΩ Max.
OPERATION FORCE: 400gf•cm

MATERIALS
BASE: Polyphenylene Sulfide (PPS)
HOUSING: Polyphenylene Sulfide (PPS)
ACTUATOR: Polyacetal
CONTACTS: Gold Over Nickel Plated
                    Glass Fabric Epoxy Resin
TERMINALS: Gold Over Nickel Plated Bronze
                     Tin Over Nickel Plated Bronze

Posted via email from Selection. Service. Speed. Switches from E-Switch.

WB2 Series 20 Amp Power Rocker Switches

The WB2 series high amp rocker switch has a panel cutout of 22mm x 30mm and an internal dust and water protection seal, rated to IP55.

More Rocker Switches
More panel mount switches
More sealed switches
More power rated switches

Certifications

   

  

   

 

SPECIFICATIONS
RATING:
Maintained Switches:
      20A 125VAC [cULus]
      20A 250VAC [cULus]
      2HP 125/250VAC [cULus]
      22(14)A 250V~ 5E4 T85 [European]

Momentary Switches:
      20A 125VAC T85 [cULus]
      20A 250VAC T85 [cULus]
      1.5HP 125/250VAC [cULus]
      18(10)A 250V~ 5E4 T85 [European]

TEMPERATURE: -20°C to 65°C Min.
CONTACT RESISTANCE: 50mΩ Max.
INSULATION RESISTANCE: 500MΩ Min. at 500VDC
DIELECTRIC STRENGTH: 1,500VAC for 1 Minute
INGRESS PROTECTION: IP55 Standard

MATERIALS
BODY: Polyamide 6/6
ACTUATOR: Polyamide 6/6
MOUNTING EARS: Polyamide 6/6
RUBBER SEAL: Ethylene Propylene
CONTACTS: Silver Alloy
TERMINALS: Silver Plated Brass

Posted via email from Selection. Service. Speed. Switches from E-Switch.

WB2 Series 20 Amp Power Rocker Switches

The WB2 series high amp rocker switch has a panel cutout of 22mm x 30mm and an internal dust and water protection seal, rated to IP55.

More Rocker Switches
More panel mount switches
More sealed switches
More power rated switches

Certifications

   

  

   

 

SPECIFICATIONS
RATING:
Maintained Switches:
      20A 125VAC [cULus]
      20A 250VAC [cULus]
      2HP 125/250VAC [cULus]
      22(14)A 250V~ 5E4 T85 [European]

Momentary Switches:
      20A 125VAC T85 [cULus]
      20A 250VAC T85 [cULus]
      1.5HP 125/250VAC [cULus]
      18(10)A 250V~ 5E4 T85 [European]

TEMPERATURE: -20°C to 65°C Min.
CONTACT RESISTANCE: 50mΩ Max.
INSULATION RESISTANCE: 500MΩ Min. at 500VDC
DIELECTRIC STRENGTH: 1,500VAC for 1 Minute
INGRESS PROTECTION: IP55 Standard

MATERIALS
BODY: Polyamide 6/6
ACTUATOR: Polyamide 6/6
MOUNTING EARS: Polyamide 6/6
RUBBER SEAL: Ethylene Propylene
CONTACTS: Silver Alloy
TERMINALS: Silver Plated Brass

Posted via email from Selection. Service. Speed. Switches from E-Switch.

TS Series Sub-Miniature Snap Action Switches

The TS series subminiature snap action switch comes with a vertical, left angle or right angle PC pin termination.  It has a very light 20 gram operating force.

The applications for the TS switch include security and detection devices, appliances, instrumentation, power tools and more.

Certifications

SPECIFICATIONS
CONTACT RATING: 0.3A 6VDC
MECHANICAL LIFE: 50,000 Cycles Typical
INSULATION RESISTANCE: 100MΩ Min.
DIELECTRIC STRENGTH: 250VAC for 1 Minute
OPERATING TEMPERATURE: -25°C to 85°C
STORAGE TEMPERATURE: -30°C to 85°C

Posted via email from Selection. Service. Speed. Switches from E-Switch.

TS1 Series Sub-Miniature Snap Action Switch

The latest addition to our snap action switch line is the TS1 series of sub-miniature switches. This snap action switch features PC pin termination and an operating force of 70 grams. Works great for the security/detection, appliance, instrumentation and power tools markets.

Certifications

SPECIFICATIONS
CONTACT RATING: 0.1A 125VAC or 48VDC
MECHANICAL LIFE: 100,000 Cycles
ELECTRICAL LIFE: 30,000 Cycles
CONTACT RESISTANCE: 300mΩ Inital Max.
INSULATION RESISTANCE: 100MΩ Min. at 250VDC
DIELECTRIC STRENGTH: 250VDC
OPERATING TEMPERATURE: -15°C to 55°C
STORAGE TEMPERATURE: -25°C to 80°C
FORCE: 70gf ± 20gf
TRAVEL: 0.35mm

Posted via email from Selection. Service. Speed. Switches from E-Switch.