600 Series Miniature Slide Switches

The 600 Series miniature slide switches are available with single and double pole options. You can also choose from multiple termination options. You can choose recessed, extended or side actuators. These slide switches have a plastic switch body housing and are great for the consumer electronics or instrumentation markets.

Certifications

SPECIFICATIONS

CONTACT RATING: Dependent on Contact Plating
MECHANICAL LIFE: 10,000 Operations
CONTACT RESISTANCE: 10mΩ Max. Typical at 2-4VDC
                                              100mA for Both Silver and Gold Plated Contacts
INSULATION RESISTANCE: 1,000MΩ Min.
DIELECTRIC STRENGTH: 1000V RMS at Sea Level
OPERATING TEMPERATURE: -30°C to 85°C

MATERIALS
CONTACTS/TERMINALS: Silver or Gold Plated Copper Alloy

Posted via email from Selection. Service. Speed. Switches from E-Switch.

KAS Series Slide Dip Switches

The KAS series slide DIP switches are available with PC pin or right angle PC pin termination. Available in up to 12 positions, these DIP switches come with tape seal options and are great for controller applications, along with telecommunications and test and instrumentation.

PLEASE NOTE: The right angle PC Pin termination option is not available with the recessed actuator. It is only available with the extended actuator.

KAS Series Slide Dip Switches

• Through hole mount DIP Switch
• From 2 to 12 positions
• Tape sealing available
• Tube packaging option

Certifications

SPECIFICATIONS

CONTACT RATING: Switch: 25mA 24VDC
                               Carry: 100mA 50VDC
OPERATING LIFE: 2,000 Make-and-Break Cycles, Each Circuit
CONTACT RESISTANCE:
                  Initial: 50mΩ Typical at 2-4VDC at 100mA
                  After Life: 100mΩ Typical at 2-4VDC at 100mA
INSULATION RESISTANCE: 100MΩ Min. at 500VDC
OPERATING FORCE: 1000gf Max.
DIELECTRIC STRENGTH: 500V RMS Min. at Sea Level Between Adjacent Terminals
TRAVEL, ACTUATOR: 2.00mm Typical
TEMPERATURE RANGE: Operating/Storage: -40°C to 85°C
VIBRATION: To MIL-STD-202F, Method 201 A
SHOCK: To MIL-STD-202F, Method 213B, Condition A
CAPACITANCE: 5pf Max. Between Adjacent Terminals

SWITCH FUNCTION: SPST, 1 Thru 12 Positions (Except Position 11)

SOLDERING RECOMMENDATION 
               Wave: 500°F (260°C) for 5s Max.
               Hand: 30W Soldering Iron at 608°F (320°C) for 2s Typical 
               Keep all switches in the "OFF" position during soldering and cleaning
               process.

MATERIALS
HOUSING AND ACTUATOR: Glass Filled Polyester (PBT) UL94-V0
CONTACTS: Phosphor Bronze With Gold Plate Over Nickel Plate
TERMINALS: Phosphor Bronze With Gold Plate Over Nickel Plate
TAPE: Mylar

PACKAGING
Switches are supplied in standard IC tubes with all poles "OFF".

Posted via email from Selection. Service. Speed. Switches from E-Switch.

PV1 Series Long Life, Water Resistant Anti-vandal Switches

PV1 series water resistant, sealed, anti-vandal switches feature long life and custom laser engraved markings. This anti-vandal switch features a clean, aesthetic look for high end products. This switch has a panel cutout size of 19mm.

Popular for use in elevators and kiosk applications, ticket dispensers and industrial-type applications.

Certifications

SPECIFICATIONS:

RATING: 2A 48VDC
TEMPERATURE: -20°C to 55°C
MECHANICAL LIFE: 1,000,000 Cycles
ELECTRICAL LIFE: 200,000 Cycles
CONTACT RESISTANCE: 50mΩ Max. at 1A 12VDC
INSULATION RESISTANCE: 1,000MΩ Min.
DIELECTRIC STRENGTH: 2,000VAC for 1 Minute
INGRESS PROTECTION: IP65
PANEL CUTOUT: 19mm Diameter

MATERIALS
BUSHING: Gold Plated Brass
                  Nickel Plated Brass
                  Stainless Steel
ACTUATOR: Gold Plated Brass
                     Nickel Plated Brass
                     Stainless Steel
BASE: Polybutylene Terephthalate
SEALING:  Silicone Rubber
                   Stainless Steel
INNER ASSEMBLY:  Polyamide 6/6
                                 Brass
SPRING: Stainless Steel
CONTACT: Silver Alloy
TERMINALS: Silver Plated Brass
                      Steel
HARDWARE: Nickel Plated Brass

Posted via email from Selection. Service. Speed. Switches from E-Switch.

TL1105 Series Tact Switches

The TL1105 series 6mm x 6mm tactile switches come with a right angle option, many actuator lengths and multiple operating forces. The TL1105 tact switch features reliable dome contact technology, and a strong tactile feedback, and can also come with an earth ground terminal. We also have a long life tact switch version of this series.

Applications for this through hole tact switch include telecommunications, consumer electronics, audio/visual, medical device, testing/instrumentation, computer peripherals and more.

Certifications

SPECIFICATIONS
CONTACT RATING: 50mA 12VDC
LIFE EXPECTANCY: 100,000 Cycles
CONTACT RESISTANCE: 100mΩ Max. Typical at 2-4VDC
                                       100mA for Both Silver and Gold Plated Contacts
INSULATION RESISTANCE: 100MΩ Min. at 100VDC for 1 Minute
DIELECTRIC STRENGTH: 250VAC
OPERATING FORCE: 100gf ± 50gf; 160gf ± 50gf; 250gf ± 50gf  
OPERATING TEMP: -20°C to 70°C
BOUNCE: <10m Second

MATERIALS
HOUSING: 6/6 Nylon
ACTUATOR: 6/6 Nylon or Acetal
COVER: Polyester
CONTACTS: Silver or Gold Plated Bronze
TERMINALS: Silver or Gold Plated Brass

Posted via email from Selection. Service. Speed. Switches from E-Switch.

TS Series Sub-Miniature Snap Action Switches

The TS series subminiature snap action switch comes with a vertical, left angle or right angle PC pin termination. The applications for the TS series snap action switch include security and detection devices, appliances, instrumentation, power tools and more.

Certifications

SPECIFICATIONS
CONTACT RATING: 0.3A 6VDC
MECHANICAL LIFE: 50,000 Cycles Typical
INSULATION RESISTANCE: 100MΩ Min.
DIELECTRIC STRENGTH: 250VAC for 1 Minute
OPERATING TEMPERATURE: -25°C to 85°C
STORAGE TEMPERATURE: -30°C to 85°C

Posted via email from Selection. Service. Speed. Switches from E-Switch.

SRK Series Rotary Dip Switches

The SRK series rotary dip switches feature through hole termination option. They come with 3x3 pin layout and are washable.

Applications for the SRK series rotary dip switches include test equipment, instrumentation, controller applications and others.

Certifications

SPECIFICATIONS
RATING: 100mA 5VDC (Switching); 
               100mA 50VDC (Non-switching)

TEMPERATURE: -10°C to 60°C (Operating)
                          -40°C to 85°C (Storage)
ELECTRICAL LIFE: 15,000 Cycles
DIELECTRIC STRENGTH: 250VAC for 1 Minute
INSULATION RESISTANCE: 100MΩ Min. at 250VDC
CONTACT RESISTANCE: 100mΩ Max.
OPERATION FORCE: 400gf•cm

MATERIALS
BASE: Polyphenylene Sulfide (PPS)
HOUSING: Polyphenylene Sulfide (PPS)
ACTUATOR: Polyacetal
CONTACTS: Gold Over Nickel Plated
                    Glass Fabric Epoxy Resin
TERMINALS: Gold Over Nickel Plated Bronze
                     Tin Over Nickel Plated Bronze

Posted via email from Selection. Service. Speed. Switches from E-Switch.

TL2243 Series Double Stacked Low Profile Tactile Switch

The TL2243 series tactile switch is a low profile, double stacked tact switch that can save space on the PC board.

This tact switch can be used in the following applications: telecommunications equipment, medical, testing and instrumentation, consumer electronics, audio/visual and computers.

Certifications

SPECIFICATIONS

CONTACT RATING: 50mA 12VDC
LIFE EXPECTANCY: 30,000 Cycles
CONTACT RESISTANCE: 100mΩ Max
INSULATION RESISTANCE: 100MΩ Min. @100VDC
DIELECTRIC STRENGTH: 250VAC
ACTUATION FORCE: 180gf ± 50gf
OPERATING TEMP: -20°C to 70°C
TRAVEL: 0.25mm

Posted via email from Selection. Service. Speed. Switches from E-Switch.

TL1100 Series Tact Switches

The TL1100 12mm x 12mm thru hole tactile switch offers reliable dome contact technology with strong tactile/audible feedback. Its multiple operating force options allows it to be applied to many industries: telecommunications, consumer electronics, medical, testing/instrumentation, computer/servers/peripherals and audio/visual.

Certifications

SPECIFICATIONS:

CONTACT RATING: 50mA 12VDC
LIFE EXPECTANCY: 100,000 Cycles
CONTACT RESISTANCE: 100mΩ Max. Typical at 2-4VDC
                                       100mA for Both Silver and Gold Plated Contacts
INSULATION RESISTANCE: 100MΩ Min.
DIELECTRIC STRENGTH: 250VAC
ACTUATION FORCE: 160gf ± 50gf; 260gf ± 50gf
OPERATING TEMPERATURE:  -20°C to 70°C

MATERIALS
HOUSING: Polybutylene Terephthalate (PBT)
ACTUATOR: Polybutylene Terephthalate (PBT)
COVER: Polyester
CONTACTS: Silver Plated Phosphor Bronze
TERMINALS: Silver Plated Copper Alloy

Posted via email from Selection. Service. Speed. Switches from E-Switch.

TL1014 Series Micro-Miniature Right Angle SMT Tact

The TL1014 subminiature tact switch is side mount actuated. This right angle SMT tact switch comes in tape and reel packaging for easy insertion into your design. Applications for the TL1014 tact switch include telecommunications, consumer electronics, audio/visual, medical, computer servers, and testing/instrumentation.

Certifications

SPECIFICATIONS
CONTACT RATING: 12VDC, 50mA
LIFE EXPECTANCY: 100,000 Cycles Minimum
CONTACT RESISTANCE: 100mΩ Max.
INSULATION RESISTANCE: 100MΩ Min.
DIELECTRIC STRENGTH: 250VAC
ACTUATOR FORCE:  180gf ± 50gf Min.
OPERATING TEMP: -20°C to 70°C
TRAVEL:  0.3 ± 0.1mm      

MATERIALS
HOUSING:  Nylon 46
ACTUATOR:  Nylon 46
COVER:  Stainless Steel
CONTACT DOME:  Stainless Steel
TERMINALS:  Silver Plated Brass

Posted via email from Selection. Service. Speed. Switches from E-Switch.

TL1150 Series Tactile Switches

TL1150 thru hole tactile switch has a long operating life cycle: 1,000,000 actuations. It has a 2-lead 6mm x 6mm design and is used in the following applications:

• Telecommunications
• Consumer Electronics
• Audio/Visual
• Medical
• Testing/Instrumentation
• Computer/Servers/Peripherals

Certifications:

 

SPECIFICATIONS:

RATING: 50mA 30VDC
ELECTRICAL LIFE: 1,000,000 Cycles
CONTACT RESISTANCE: 100mΩ at 5VDC
INSULATION RESISTANCE: 100MΩ Min.
DIELECTRIC STRENGTH: 600VAC
OPERATING  FORCE: 70gf ± 20gf
OPERATING TEMP: -25°C to 85°C
TRAVEL: 0.35 ± 0.2mm

Posted via email from Selection. Service. Speed. Switches from E-Switch.

TL1015 series ultra-miniature tact switch

Micro tact switch: The TL1015 series ultra-miniature tact switch is top actuated for miniature SMT applications.  This tact switch is available with Boss (locating pin) and without Boss. The TL1015 series tact switch comes in tape and reel packaging. Applications include consumer electronics, telecommunications, audio/visual, medical and more.

Certifications:

SPECIFICATIONS:

CONTACT RATING: 50mA 12VDC
LIFE EXPECTANCY: 50,000 Cycles
CONTACT RESISTANCE: 100mΩ Max. Initial
INSULATION RESISTANCE: 100MΩ Min. at 100VDC
DIELECTRIC STRENGTH: 250VAC
ACTUATOR FORCE: 160gf ± 50gf
OPERATING TEMP: -20°C to 70°C
TRAVEL: 0.2 ± 0.1mm       
PACKAGING: Tape and Reel
TAPE & REEL:  2,500 Pieces per Reel

Posted via email from Selection. Service. Speed. Switches from E-Switch.

TL3310 Series Normally Closed Tactile Switch

The TL3310 series normally closed, surface mount (SMT) tactile switch offers the user big quality in a little package. There are 2 operating force options: 120 or 200 gram force -- to choose from.

Applications for this miniature tactile switch include telecommunications, consumer electronics, audio/visual, medical equipment, testing/instrumentation, and computer peripherals.

Certifications

SPECIFICATIONS
CONTACT RATING: 50mA 50VDC
LIFE EXPECTANCY: 100,000 Cycles - (100gf)
                                50,000 Cycles - (200gf)
CONTACT RESISTANCE: 100mΩ Max., Typical at 2-4VDC
INSULATION RESISTANCE: 1000MΩ
DIELECTRIC STRENGTH: 250VAC
ACTUATION FORCE: 100gf ± 40gf, 200gf ± 50gf
OPERATING TEMP: -20°C to 70°C (100gf)
                               -30°C to 80°C (200gf)
TRAVEL: 0.3mm ± 0.15mm (100gf)                  
               0.5mm ± 0.2mm (200gf)

Posted via email from Selection. Service. Speed. Switches from E-Switch.